WoL via Command Line query

Forums Forums Depicus Wake On Lan Apps Apple Mac Specific WoL via Command Line query

This topic contains 5 replies, has 2 voices, and was last updated by  Depicus 1 year, 8 months ago.

Viewing 6 posts - 1 through 6 (of 6 total)
Author Posts
Author Posts
November 6, 2012 at 8:45 pm #648

yueh
Member

Is wolcmd only usable with MacOS 10.6?
Have only dabbled with Terminal so far, but purchase of Airport Extreme has lost me the ability to Port Forward to the broadcast address :(
Looking to SSH into an always-on Mac running 10.4 to talk to my LAN.

November 6, 2012 at 9:31 pm #649

Depicus
Member

It was compiled against 10.6 because that was the oldest version I had to test on but I can recompile to 10.4 if you want.

November 7, 2012 at 9:29 am #650

yueh
Member

Thanks, if it’s not a lot of trouble- please do. And a 10.5 version would be useful to me in the future and perhaps to others as they press older machines into “sentry duty”?
All I can tell you as a Darwin n00b is that the Dynamic Linker was unhappy :)

  • This reply was modified 1 year, 8 months ago by  yueh.
November 7, 2012 at 9:42 am #653

Depicus
Member

Ok here is the link

http://www.depicus.com/downloads/wolcmd10.4.zip

Should work on 10.4 onwards.

November 7, 2012 at 2:14 pm #654

yueh
Member

Thanks.
Two problems:
1) Forgot to tell you 10.4 machine is PPC, so get “bad cpu type”.
2)Fails under 10.5 on Intel machine with:
:~ admin$ /Users/admin/Desktop/wolcmd
dyld: Symbol not found: __NSConcreteGlobalBlock
Referenced from: /Users/admin/Desktop/wolcmd
Expected in: /usr/lib/libSystem.B.dylib

Trace/BPT trap

If I boot the Intel machine into 10.6, the original version works as expected.
Sorry to be a pain!

  • This reply was modified 1 year, 8 months ago by  yueh.
November 7, 2012 at 6:46 pm #656

Depicus
Member

Well I don’t have a working PPC so 10.4 is out then.

10.5 not sure why that doesn’t work but will have a look.

Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic.